Step by Step DIY Guide
Bring privacy and beauty to your windows with ease. Follow our simple installation guide for privacy window films and watch the video below to learn how to achieve a flawless, professional look in just a few minutes.
✨ Quick Installation Steps
- Clean: Wipe glass spotless — no dust, paint, or grease.
- Spray: Mist the glass with a mild soapy water solution.
- Peel: Gently remove the liner while spraying the adhesive side.
- Apply: Place the film on the wet surface and align it perfectly.
- Squeegee: Push water and bubbles out from the center to edges.
- Trim: Cut cleanly along the frame with a sharp knife.
- Dry: Wipe edges and allow the film to cure for 24–72 hours.
🌸 Aftercare & Maintenance
Avoid cleaning your window film for at least seven days after installation. Once cured, clean gently with a soft microfiber cloth and a non-ammonia glass cleaner. A slight haze or a few bubbles are normal — they will disappear as the film dries completely.
💡 Troubleshooting & Pro Tips
- Bubbles: Lift the corner, re-spray water, and smooth out with the squeegee.
- Dust specks: Remove gently with a wet fingertip and re-apply.
- Edge lifting: Add a drop of water under the edge and press down firmly.
- Pro Tip: Always install films indoors away from direct sunlight for best results.